Specific functions
It can accurately determine the buried location of the object's minerals, and is professionally used for positioning; the only disadvantage is that the machine does not have a visual function.
It can also rely on the frequency regulator to identify the specific type of metal.
Search system: microcomputer processor control and reflective conductivity
Search range: 0-1000 meters
Detection depth: 0-50 meters
Energy: 9.6V 800mAh
Weight: 2.8KG
Detection type: gold, silver, jade, gemstone
Charging method: This instrument has been installed with a rechargeable battery, which can be charged directly by connecting to the charger. The charging time is 10-12 hours.
Test operation
Turn on the host and searcher switches, and the working indicator light on the searcher will flash; when the copper gear is selected on the host, the corresponding copper indicator light on the searcher will light up, and when the other silver, gold, and gemstone gears on the host are selected in turn, the corresponding indicator light on the searcher will light up.
If the gear is selected on the host, but the corresponding indicator light on the searcher is not on, it may be that the host and searcher are insufficient and need to be charged.
If the above conditions are normal, it means that the instrument is normal and can be used with confidence.
Use of the transmitter
Power is the power switch button (when the instrument is not in use, the switch should not be turned on)
Please select the metal you want to detect according to the metal you want to detect
Gold (gold) Silver (silver) copper (copper) Diam (jade) Note (cannot select two metals at the same time) otherwise it will damage the instrument and cause the warranty to be void.
Use of the host
Just turn on the power switch. Select the metal category according to the original on the transmitter to detect.
Operation method
Hang the host vertically around your waist and try to keep it parallel to your legs. If you are operating the searcher with your right hand, hang it on the right waist. If you are operating it with your left hand, hang it on the left. Note: Remove metal objects such as mobile phones and key chains.
2. Correct use of the tracker searcher:
The searcher is tilted upward by 1-3 degrees; when holding the searcher, hold your hands tightly to your body and do not shake; when walking, pay attention to the scanning speed. If the speed is slow and the movement is not enough, the instrument will not be polarized. If the speed is too fast, it will hinder the detection of the object;
Because the handle of the instrument rotates freely, the wind will interfere with the Texas God. Therefore, the instrument will be interfered with in windy conditions. The use effect of this instrument is closely related to the operator's control skills of scanning.
Choose a comfortable posture to stand on the ground, hold the instrument with your hands, and keep your elbows close to the sides of your body. Note: You must keep the instrument in front of your body, so that the receiving antenna has enough space to unfold, and let the antenna tilt slightly downward from the horizontal line. This angle is about 7 to 10 degrees.
2. Hold the instrument as mentioned above, scan very slowly in an arc, and turn yourself at the same time. At this time, the detector's elbows should always be close to the sides of the body, and it is about 40 to 60 degrees. Note: The detector must rotate slowly and keep the body stable.
3. Standardize your scanning action. First, let the receiving antenna extend correctly. Make the receiving antenna directly in front of you, 90 degrees to your body, and not deflect to the left or right.
4. When the antenna is aimed at the target, the instrument will lock it, even if you cross the target and continue to detect. When you think this lock is effective, you will remember this direction. Then, move the instrument about 10 meters to the left or right, and repeat the process of locking the target just mentioned. Observe the locking direction this time, and the intersection of the two directions is the buried position of the target.
5. If you think the specific position just measured is still offset, you can lock it from another angle. If the target is within 10 meters, you will walk slowly and steadily along one of the specified routes. When you pass the target and are directly above it, the antenna of the instrument will swing to both sides. At this time, the measured position is very accurate.
Audited Supplier 
){kind=link}