This instrument is a perfect combination of field archaeology and scientific theory. It has a high-quality long-distance search system and a precise positioning detection system. It breaks through the conventional detection method and uses a micro-processor to control the chip unit correction and the instrument self-check system. It can easily and quickly scan and detect, greatly improving the work efficiency of treasure hunting enthusiasts and reducing the labor intensity of detection. It is currently a practical and economical metal detection instrument.
Specific functions
It can accurately determine the buried location of the object and can locate it.
It can also rely on the frequency regulator to identify the specific type of metal.
Search system: microcomputer processor control and reflective conductivity
Search range: 0-99 meters
Detection depth: 0-16 meters
Energy: 12V 1600mAh
Weight: 2.8KG
Detection type: gold, silver, copper, gemstone
Charging method: This instrument has a rechargeable battery installed, which can be charged directly by connecting to the charger. The charging time is 10-12 hours.
Test operation
Turn on the main unit and the searcher switch, the working indicator light on the searcher will flash; when the copper gear is selected on the main unit, the corresponding copper indicator light on the searcher will light up, and when the other silver, gold, and gem gears on the main unit are selected in turn, the corresponding indicator light on the searcher will light up.
If the gear is selected on the main unit, but the corresponding indicator light on the searcher is not on, it is possible that the main unit and the searcher are low on power and need to be charged.
If the above situation is normal, it means that the instrument is normal and can be used with confidence.
Use of the transmitter
Power is the power switch button (when the instrument is not in use, do not turn on the switch)
Please select the metal you want to detect according to the metal you want to detect
Gold (gold) Silver (silver) copper (copper) Diam (jade) Note (cannot select two metals at the same time) otherwise it will damage the instrument and cause the warranty to be void.
Use of the main unit
Just turn on the power switch. Select the metal category according to the original on the transmitter to detect.
Operation method
Hang the host vertically around your waist, try to keep it parallel to your legs. If you are operating the searcher with your right hand, hang it on your right waist, if you are operating it with your left hand, hang it on the left. Note: Remove metal objects such as mobile phones and key chains.
2. Correct use of the tracker searcher:
The searcher is tilted upward by 1-3 degrees; when holding the searcher, hold your hands tightly to your body and do not shake; when walking, pay attention to the scanning speed. If the speed is slow and the movement is not enough, the instrument will not be polarized. If the speed is too fast, it will hinder the detection of the detection object;
Because the handheld handle of the instrument will rotate freely, the wind will interfere with the Texas God. Therefore, the use of this instrument will be interfered with to a certain extent when it is used in windy conditions. The use effect of this instrument is closely related to the operator's control skills for scanning.
Choose a comfortable posture to stand on the ground, hold the instrument with your hands, and keep your elbows tightly against both sides of your body. Note: You must place the instrument in front of your body, allow the receiving antenna to have enough space to unfold, and tilt the antenna slightly downward from the horizontal. This angle is about 7 to 10 degrees.
2. As mentioned above, hold the instrument and scan very slowly in an arc while turning yourself. At this time, the detector's elbows should always be tightly against the sides of the body, and it can be turned about 40 to 60 degrees. Note: The detector must rotate slowly and keep the body stable.
3. Standardize your scanning action. First, let the receiving antenna extend correctly. Make the receiving antenna directly in front of you, unfold at 90 degrees to your body, and cannot deflect to the left or right.
4. When the antenna is aimed at the target, the instrument will lock, even if you cross the target and continue to detect. When you feel that this lock is effective, you will remember this direction. Then, move the instrument about 10 meters to the left or right, and repeat the process of locking the target just mentioned. Observe the direction of this lock, and the intersection of the two directions is the buried position of the target.
5. If you feel that the specific position just measured is still somewhat offset, you can lock it from another angle. If the target is within about 10 meters, you can walk slowly and steadily along one of the specified routes. When you pass the target and are directly above it, the antenna of the instrument will swing from side to side. At this time, the measured position is very accurate.
Audited Supplier 
){kind=link}