Handheld Underground Metal Copper Detector
Color: Many Color Avaliable
You can contact us for which color that you need
Copper (locating copper coins), Gold (measuring gold), Silver (measuring silver dollars), Diam (measuring jade and gemstones)
The long-range metal detector uses a large-depth long-distance metal detection system, that is, a treasure precious metal directional indicator. Its characteristics are ultra-deep large-area rapid scanning and detection. The detection area in a few minutes is equivalent to the long-term workload of an ordinary metal detector.
Product parameter configuration:
Product model: Gray Eagle All-in-One
Scope of use: outdoor detection, archaeology, treasure hunting
Detection depth range: 1-20M
Detection distance range: 1-1200M
Rechargeable lithium battery: continuous work for more than 10 hours
Voltage: DC12.6V
Temperature range: -10 degrees - +50 degrees
Weight: 1.9KG
Detectable metal types: gold, Yuan Datou, bronze mirror, diamond (auxiliary), select gold, that is, scan gold (if the object is too large, it will affect the machine)
Specific functions:
It can accurately determine the buried position of the object by fixing the point, and can locate it.
It can also rely on the frequency regulator to identify the specific type of metal.
Specific operation:
After receiving the machine, you need to charge the machine first. Both the transmitter box and the receiver need to be charged (because the built-in batteries of the transmitter box and the receiver are discharged during transportation, which consumes a lot of power). If you do not charge, the transmission and reception signals may be weakened due to insufficient power, causing the machine to be unusable.
The normal charging time is 5-8 hours.
After fully charged, we can operate the machine. Take scanning gold as an example. Turn on the power switch of the transmitter box and the receiver. At this time, the scanning light on the receiver will flash. At the same time, we press the gold button on the transmitter box. We will find that the indicator light of the corresponding gold element on the receiver will light up; at this time, we have to use the pointer of the receiver to receive iron metal for about 10 seconds. The purpose of this is to eliminate the magnetism of the receiver. Then, we take off the mobile phone that can send signals and the necklace on our body and put them aside; this is to eliminate the interference of the metal on the body to the receiver. After that, we hang the transmitter box around our waist and hold the receiver in our hands. When holding the receiver, we must keep the receiver balanced to ensure that the receiver will not rotate because we are not balanced. After ensuring the receiver is balanced, we can start scanning at a constant speed in a certain direction. During the scanning process, we still need to keep the receiver balanced and pay attention to the indication of the receiver pointer. When the receiver pointer receives the signal from the underground gold, the pointer will start to rotate in the direction of the signal from the gold. If the gold is too small, the pointer may rotate slightly or even not rotate. If it rotates and the rotation amplitude is large, we can roughly determine the direction of the gold, which is the direction indicated by the pointer. This also requires 2-3 confirmations.
){kind=link}