| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Precision Outdoor Underground Metal Detector
Product Description:
New 3D folding display screen with built-in rechargeable battery that can be repeatedly charged and used.
Specific functions:
It can accurately determine the burial location of objects through fixed-point positioning and can be located.
It can also rely on frequency regulators to identify the specific type of metal.
specification:
| Place of Origin | China,Guang Dong |
| Brand Name | gold metal detector |
| Power Supply | 12(V) |
| Usage | gold detector for Treasure Hunting |
| Application | Professional metal detector for Gold Prospecting |
| Sensitivity | can find sand gold and placer gold |
| Feature | Professional gold metal detector |
| Warranty | 12 Months |
| MOQ | 1 PCS |
Product parameters:
Model: New 3D Folding Display Metal Detector
Input voltage: 100-240VAC-50/60Hz
Output voltage: 12.6V-1A
Usage: Copper, silver, gold, diamond positioning
Search range: 1-1500 meters
Maximum detection depth: 1-50 meters
Working hours: 10 hours
Charging time: 8 hours
Operation method:
Because the handheld handle of the instrument rotates freely, wind can interfere with the machine. So the instrument will be subject to certain interference when used in windy conditions. The effectiveness of using this instrument is closely related to the operator's control skills in scanning.
Remove electronic objects and copper, silver, gold, and diamond objects from the body at home to avoid interfering with the machine during operation. Determine the area to be scanned, turn on the machine, and hold the machine pointer in contact with the ground for about a minute to remove static electricity from the machine. Then choose a comfortable position to stand on the ground, holding the instrument with your hands and keeping your elbows tightly pressed against both sides of your body. Attention: You must place this instrument in front of your body, allowing enough space for the receiving antenna to deploy, and tilt the antenna slightly downwards from the horizontal line. This angle is approximately between 7 and 10 degrees.
1. Standardize your scanning actions. Firstly, ensure that the receiving antenna is properly extended. Place the receiving antenna in front of you at a 90 degree angle to your body, and the machine should not deflect to the left or right.
2. When the antenna is aimed at the target object, the instrument will lock in, even if you continue to probe across the target. When you feel that this lock is effective, remember this direction. Then, move the instrument about 10 meters to the left or right and repeat the process of locking the target as mentioned earlier. Observing the locking direction this time, the intersection of the two directions is the burial location of the target object. The more directional points are determined, the more accurate the results obtained.
3. If you feel that there is still some deviation from the specific position measured just now, you can lock it from another angle. If the target object is within about 10 meters, slowly and steadily follow one of the designated routes. When you pass by the target object and are directly above it, the antenna of the instrument will sway on both sides. At this point, the measured position is very accurate.
Introduction to auxiliary detection methods:
Box method
Recommend using the box method to narrow down the search scope. This method can locate as accurately as possible. Approaching the target from four directions to obtain accurate and equivalent responses for precise positioning of the target.
First, place the target on the ground, and then you can learn to adjust the product to point in the direction of the target. Therefore, a skilled operator typically sets sample targets, walks past targets placed on the ground, observes hit rates, adjusts instruments, and then continues to search parallel to the area after narrowing down the target range using the crossover method.
Once you follow this step, you can narrow down the area to be equal to or less than 20 feet. Then you can use a regular metal detector to complete the work. Some people who are quite proficient in using this product can almost accurately locate the target point to their feet.
When using this method to search in the target area, one should stand at the front of the area and scan. The detector will display whether the searched substance or material is located in the left or right half of the area.
If the detection is carried out in the right half of the area, move to the center of this part and scan again. Through the second detection, trained operators can determine the quarter circle, left or right half, and vertical segmentation area where the substance is located.
matters needing attention:
1. Due to the presence of geomagnetic storms and solar auroras, this instrument must undergo a period of debugging before normal use. During this period, the receiver will continue to receive signals, but the instrument will not respond. This situation is beyond the control of the crow and requires some time for adaptation.
2. This instrument is more suitable for field operations, as it is susceptible to interference, especially radio waves, in urban areas. Therefore, before using the instrument, it is necessary to turn off mobile phones and other devices.
3. We are not responsible for any damage to the instrument caused by human damage or replacement of internal parts.
Maintenance and upkeep
A machine is an instrument with innovative design and precise craftsmanship. This instrument will open the door to wealth for you and help you reach the pinnacle of your career! The following suggestions will help you use and cherish this instrument correctly, and improve its service life.
1, Do not disassemble or modify the instrument.
2, Try to avoid using mobile phones or other metals near the instrument during operation.
3, It is best to use this instrument in a temperature range of 0 ° C-40 ° C and a humidity range of 10% -30%! 4, Short circuit the battery with metal objects such as wires and needles, and do not place the battery with metal objects such as necklaces, otherwise it may cause electrical leakage, overheating, explosion, and fire.
5, Do not charge continuously for more than 24 hours. Please use 220V AC power. Attention: New batteries can only achieve optimal performance after undergoing two or three cycles of full charging and discharging.
6, Stay away from dust and dirt, as they can cause corrosion and wear on parts. Regularly wipe the detector with a damp cloth to keep its appearance clean and new. Do not use irritating chemicals to clean products.
7, Please do not place water containers or other items next to the charger to prevent water splashing and causing overheating, leakage, or malfunction of the charger.
8, Do not place the instrument for charging in these areas: places with direct sunlight; Places where the external temperature is below 0 degrees or above 40 degrees; A damp and dusty place; Places with high vibration; Television, etc.
){kind=link}