AKS6 generation remote underground metal detector, available in gold, blue, silver, black, red, rose gold and other colors. In addition to these colors, other colors can also be customized. Built-in rechargeable battery, can be repeatedly charged and used repeatedly. The battery is normally discharged and charged, and the life can reach more than 2 years.
Product parameters:
Model: AKS6 generation metal detector gold, silver and copper gold detector (REAL AKS is a metal detector for metal detection and positioning, and is a metal detector with iron removal function)
Charger input voltage: 100-240VAC-50/60Hz
Charger output voltage: 12.6V-1A
Battery: 11.1V Full charge: 12.3-12.6V
Use: Copper coins, copper mirrors, silver necklaces, gold mines, diamonds and gemstones with large reserves. The four metals cannot be detected for cavities, ebony and agate.
Search range: 800 meters
Maximum detection depth: 14 meters
Working time: 10-20 hours
Charging time: 8 hours
Specific functions:
It can determine the buried position of objects through fixed-point connection. If it is used with the underground metal detector md5008, or the more efficient XP underground treasure hunter, it can accurately locate the hidden place or position of metal.
Specific operation:
After receiving the machine, you need to charge the machine first. Both the transmitter box and the receiver need to be charged (because the built-in batteries of the transmitter box and the receiver are discharged during transportation, which consumes a lot of power). If you do not charge it, the transmission and reception signals may be weakened due to insufficient power, causing the machine to be unusable. The normal charging time is 5-8 hours. Now a high-current charger is used, which can be fully charged quickly. When charging, as long as the charger shows a green light, it is roughly full.
Operation focus, point positioning:
After fully charged, we can operate the machine. Take scanning gold as an example. Turn on the power switch of the transmitter box and the receiver. At this time, the scanning light on the receiver will flash. At the same time, we press the gold button on the transmitter box, and we will find that the indicator light of the corresponding gold element on the receiver will light up; at this time, we have to use the pointer of the receiver to receive iron metal for about 10 seconds. The purpose of doing this is to eliminate the magnetism of the receiver. Then, we take off the mobile phone and necklace that can send signals and put them aside; this is to eliminate the interference of the metal on the body to the receiver. After that, we hang the transmitter box around the waist and hold the receiver in our hands. When holding the receiver, we must keep the receiver balanced to ensure that the receiver will not rotate because we are not balanced. After ensuring that the receiver is balanced, we can start scanning at a constant speed in a certain direction. During the scanning process, we still have to keep the receiver balanced and pay attention to the indication of the receiver pointer. When the receiver pointer receives the signal from the underground gold, the pointer will start to rotate in the direction of the gold signal. If the gold is too small, the pointer will show a slight rotation or even no rotation. If there is a rotation and the rotation amplitude is large, we can roughly determine the direction of gold, which is the direction pointed by the pointer. This also requires 2-3 confirmations.
Audited Supplier 
){kind=link}