Packing weight: 1590g Storage inner box packaging size: 13*8*6cm Aircraft outer box packaging size: 25x20x7cm
SV4401A Vector Network Analyzer 50KHz-4.4GHz
Product performance:
1. Measurement frequency range: 50KHz-4400MHz;
2. RF output power: -12dbm to -42dbm adjustable (step 1db) (error in the whole frequency band: plus or minus 1db);
3. Frequency accuracy: ± 1ppm, ±5KHz >140MHz
4. S21 dynamic range: 90dB (below 2GHz), 75dB (4.4GHz) (25x average and 100Hz intermediate frequency are turned on). If the intermediate frequency 100Hz and 25x average are turned on, 100db dynamic can be achieved below 1.3GHz.
5.S11 dynamic range: better than 50db
6.2 port return loss: 30dB typ (1.5GHz), 20dB min (4.4GHz)
7.USB interface: USB Type-C communication mode: CDC (serial)
8.Number of calibration points: 101-1001 points
9.Number of scanning points: 101-1001 points
10.Display tracking: 7 traces
11.Mark: 8 mark points (mark bar can be dragged anywhere on the screen)
12.Settings saved: 12 (shortcut menu) (after saving, it can be directly called when it is turned on next time, without recalibration. The saved parameters before the last shutdown are automatically called when it is turned on next time, and the function of automatically storing the start and end frequencies is added to facilitate the next call) Built-in file saving, in principle, can save unlimited storage units, depending on the capacity of the TF card.
13. Scanning speed: about 400 points/second
14. Can measure S parameters, voltage standing wave ratio SWR Smith chart phase diagram, group delay, TDR function...;
15. Use 7-inch high-brightness IPS capacitive touch screen, IPS TFT (1024x600) with a viewing angle of nearly 180°, long-term use will not hurt the eyes; (You can see the curve clearly outdoors, and the screen brightness is higher in this type of handheld vector network)
16. Use metal casing to effectively shield electromagnetic interference, so that S21 has a dynamic range of better than 100dB within 2GHz
17. Compact design, body size 195mm*150mm*35mm, small and portable; outer packaging size: 25x20x7cm
18. The RF interface is L16-F (N female socket), which is convenient for connecting various types of DUTs;
19. The standard configuration uses two 18650 batteries with a total capacity of 6600mAh, and the battery life can reach 4 hours; (You can modify it to install two 21700 battery holders, the capacity can reach 10000mAH, and the battery life can reach about 6 hours.
20. Full touch screen design, supporting 4 front panel buttons at the same time, flexible and convenient operation;
21. Support Chinese menu;
22. Support Support screen brightness adjustment;
23. Upgrade the firmware through a virtual U disk, no programmer is required, only a USB cable is needed to upgrade the firmware;
22. Expand a USB power output interface, 5V/1A output (can be used as a power bank);
24. Use a high current 2A charging IC, the charging time is shorter;
25. Support host computer, you can use a computer as the display operation interface;
26. Net weight: 1160g,
27. Total weight of outer packaging: 1590g .
28.Supports screenshots and supports uploading screenshots to the computer.
Operation video: 7067397812358808076
Firmware upgrade method:
Connect the computer with a data cable, hold down Ctrl and turn on the computer, click on the Udisk of the vector network, and you will see a USB flash drive on the computer. Copy the upgrade file to the USB flash drive, overwrite the original file, shut down, hold down Ctrl and turn on the computer, a dialog box will pop up, click Upgrade to upgrade, wait for the completion, shut down and restart the computer.
Packing list:
SV4401A host x1
N to SMA adapter x2
SMA open/short/load calibration kit x1
SMA dual female straight-through adapter x2
SMA dual female straight-through adapter x1
50cm RG316 cable x2
USB type-C data cable x1
Two-in-one capacitive stylus x1
High-end screen cleaning cloth x1
Audited Supplier 
){kind=link}